• BEEP
  • BEEP
  • BEEP
  • BEEP

FOLLOW US

BEEP



BEEP : Test loop for the investigation and development of pumps

This loop is intended for preliminary design studies and R&D, and enables measurements to be made of low NPSH, pressure fluctuations, cavitation, performance and efficiency.

It is also used for validating the performance of scale models of large pumps (coolant and primary pumps, etc.) and conforms to ISO standard9906. Its high accuracy allows cavitation to be studied.

IN BRIEF :

  • FLOWRATE :

    0 to 1 m3/s
  • PRESSURE :

    0 to 235 psi
  • INTERFACES :

    20 inch or 14 inch
  • DRIVE :

    0 to 3000 rpm / 220 kW
  • NPSH :

    min. 1m



 

Cavitation | Inter-spectral matrix | Vibrations | Pressure fluctuations | Radial, axial thrust bearing | NPSH | Pump | Scale model |

FaLang translation system by Faboba

FOLLOW US